T40S-600

(T40S model gets light inside)

Product number :

A0600-T40S-110-BE (110V)
A0600-T40S-230-BE (230V)

Function :

T40S series is a plug and play, fully auto dry cabinet which will be stable at 40℃ and ≦5%RH. It is
especially designed for moisture sensitive SMD packages to comply with J-STD-033C.

There are 4 main functions:

• Wider application in resetting the floor life: Moisture sensitivity SMD packages which are exposed to the air and exceed the floor life should be stored in the T40W series for resetting the floor life. (see JSTD-033C table 4-1, 4-3) For example: If MSD parts of MSD Level 4,5 and 5a are exposed for less than eight hours, they can be stored in a dry cabinet for resetting the floor life. However, if their exposure time is longer than eight hours, the SMD packages should be stored at 40℃ in a T40S series to reset the floor life.
• Labor saving: SMD packages shipped in low temperature carriers may not be baked in a traditional high temperature oven with the temperature higher than 40℃, as it will cause deformation of the carriers. Storing in a T40W series, operators do not need to remove the SMD package to thermally safer carriers. It saves labor cost and eliminates the chance of damaging the carriers.
• Embedded Alarm: The temperature or relative humidity of interior cabinet exceeds the preset value will activate the embedded alarm of buzz and flash in the control panel.
• Memo Cards: Special “Slash Cover Sheet” designs to allow inserting the memo cards which can record the necessary storage information of MSD management.

Features :

• Modular Design: This is a modularly designed dry cabinet. The main modules are display controller, power box, dehumidifier, shelf, caster wheel and cable. All of the modules can be replaced easily.
• Green Design: The performance of the dry cabinet can be upgraded by just changing the modules. There will be no waste materials created to pollute the environment. The old modules can be collected and sent back to the maker. Dry cabinets can be used as long as the cabinet structure is in
• Data Recording: It is important to verify that the condition of storage meets the regulation of J-STD-033C. The users can connect note book PCs directly to the RS232 port of the cabinet to acquire the data or use our data logger to record the data. With our data recording function, the historical fluctuation of relative humidity and temperature can be shown clearly in the graph. The floor life of the Moisture Sensitive Devices can also be calculated in the software. This uniquely patented function can easily verify if the SMD packages are stored at proper condition. It is very convenient for those who carry out quality assurance procedures.
• Memo Cards: Special “Slash Cover Sheet” designs to allow inserting the memo cards which can record the necessary storage information of MSD management.
• Calibration Reminding: The drift effect of sensors might influence the accuracy. In order to help complying with the regulation of ISO, a unique design of calibration expiration reminding function is offered in this model. When the sensor runs over 365 days, the decimal point in the panel will be flashed for reminding the user.
• Alarm Setting: There are two ways of alert – flash and buzz. Alert can be activated when the relative humidity or temperature is higher than the setting of upper limit. And the flash and buzz alert can be activated by different delay time.

Specifications :

• Temperature & Humidity Range: 40±2°C, ≤5%RH
• Outside Dimension: W600*D770*H1805mm
• Shelves: 5 shelves (p/n: A0600-D3-SUS)
• Light inside by LED bar
• Color: black
• Voltage: 230V
• Display Precision: ±1.0°C, ±3.0%RH
• Software: Humidity Manager V2 for drawing the curve of RH and temperature.
• Structure: 1mm thick carbon steel with antistatic paint.
• Door: Compression handles, airtight magnetic sealers and antistatic glass.
• Wheel: 4 antistatic 3” wheels, two of them with brakes.
• Grounding Wire: 1MΩ. (940mm long)
• ESD Paint: 10^3~10^9Ω. (surface resistance)
• Power Consumption: Max. 600W; Ave. 300Wh
• Baking 40°C Dry Cabinet is suitable for ambient temperature >15°C.